Motone Custom Parts
Motone Front Indicator/Turn Signal Relocation Bracket - BLACK
Custom CNC milled from aviation grade billet 6061t aluminium.
Includes all stainless fixings/washers.
Available here Anodised Black (also available in silver)
Fits in front fork assembly either behind or in place of regulator below the headlight.
You do not have to relocate the regulator to fit this part - however we do make a regulator relocation bracket as well.
SUITABLE FOR USE WITH AFTERMARKET INDICATORS WITH 8-10mm THREADS AS WELL AS FACTORY TRIUMPH INDICATORS
Compatible with the following models (2001-2015 Present - Fits both CARB and EFI bikes):
- HINKLEY BONNEVILLE T100
- SE
- SCRAMBLER
- THRUXTON
SKU: PTS611
Motone Wrap-Around Fork M10 (10mm) Indicator Turn Signal Bracket Clamps - Pair - 47mm - Black (Bobber)
Custom CNC milled from aviation grade billet 6061t aluminium.
Includes a custom turned billet nut which slides down over the thread of your turn signal stem.
The clamps are designed primarily to be used with Motone indicators which run on a M10x1.50 stainless bolt
We also include some threaded nuts at M10x1.25 pitch as well so as long as your signals run on a M10 bolt and have about 30mm length of thread other brand indicators may work with them as well.
Available here Anodised Black PAIR
Compatible with the following models:
- BOBBER BLACK (47mm fork)
- FITS ALL BIKES WITH 47MM FORKS
ALSO INCLUDES M10x1.5MM AND M10x1.25MM SLEEVED BOLTS
SKU: PXN047B
Motone Winged 8-Ball Fuel Tank/Side Panel Emblems - Billet
CNC Cut from billet aviation 6061-T6 aluminium.
Self adhesive with laser cut 3M tape on the back.
Machined out one-by-one on a milling table before being polished and painted.
Each badge measures 115mm (4.5 inch) Wide.
Some slight bending possible to fit on a tank.
Motone Craig-Bars Engine Frame Crash bars LC -T120/T100/Street Black
The Craig Bars - Named after Craig, because if he had a set of these fitted to his bike when he dropped it he wouldnt written if off. Dont be a Craig : We have designed these to be the best bars on the market - with the 2 interconnecting cross bars, plus the highly buttressed welding on the mounting brackets these are proper hardcore compared to some of the more "dresser" bars you might see on the market . Built to Survive.
25MM O/D SS TUBING
Compatible with the following models:
- Street Twin
- Speed Twin 900
- LC T100
- T120
SKU: MCB018
Motone Jupiter-2 Exhaust Tip Kit Bonneville - Black
Exhaust Tips and Adapter Bracket kit for 2016 and up Triumph T100 and T120 Motorsickles- We call these the Jupiter-2
Remove your stock mufflers and replace with these High Pressure Die Cast Tips – Finish in BLACK
– including Stainless steel adapter brackets and hardware
Compatible with the following models:
- T100 (2016 upwards)
- T120 (2016 upwards)
SKU: MMU530
Motone Up-and-Over Riser Kit For One Inch Bars - Black
Bolt on Replacement for the Stock Riser Clamp assembly which works on any of the Triumph Bonneville family which have one inch bars.
We originally designed the Up-And-Over Kit to give you a one inch rise and a one inch pull back over standard bar position. This is about as far as you can take the stock bars without having to install longer cables.
Easy to fit at home with basic tools.
Compatible with the following models:
- T100
- T120
- Speedmaster
- Bobber
- Thruxton EFI
- America
SKU: MTE087+MTE069
Motone Defender MKII Sump Guard Bobber - Black
Deep Drawn from type 5052 Aluminium Sheet - the Motone Defender Sump Guard
Hand Brushed and then Anodised Black
Designed and Built to Last - there is alot of junk out there
This part will not fit with factory forward controls therefore wont work with the Speedmaster 1200 which has forward controls on most common variants
Compatible with the following models:
- Bobber 1200 (Black, Standard & Single Disc Bobber)
SKU: MTE182
Motone Exacta Mounts Bar End Mirror Adapter Mount Kit - Pair
These the Exacta Mounts - designed for the situation where you want to fit a bar end mirror to your handlebar but you have no free space at the end of the bar to clamp the mirror
SOLD IN PAIRS (2 pcs)
These brackets slide up inside your hollow bar with a design that expands tight when the bolt is screwed down providing a solid Mount for the bar end mirror of your choice
22mm/25.4mm
SKU: MRR005
Motone Rear Wiring Loom Bobber/Scrambler 1200/Speedmaster
Plug and Play Rear wiring Loom - this connects directly into the rear harness plug of your bike and allows you to fit after market Taillights, Indicators, Accessories etc without having to chop into the stock loom. Note that this loom contains a resistor to stop the issue causing engine warning light when fitting aftermarket Tail lights.
Compatible with the following models:
- Triumph Bobber
- Speedmaster 1200
- Scrambler 1200
Wired as Follows
Orange - R - is RHS Indicator
Brown - L - is LHS Indicator
As part of the T (Tail light) Section we have YELLOW as the Running Light, RED as the Brake Light as well as associated Earths for each of the above
The Tail light connectors all have double spades in the case that you are running for example our Pico 3in1 Rear lights which means you essentially have 2 tail lights (on on each side)
There is also a spare A Auxiliary Wire in Green which has its own earth, you can either use this to power an external device or you can use it to power a Number Plate Illumination Light if you are running a side mount plate kit which doesn't have a tail light with a license plate illumination light section of its own.
And remember the top 3 electrical faults are 1 Bad Earth, 2 Bad Earth, 3 Bad Earth. Always check fuse box - and for belt and braces you may want to disconnect first battery before plugging in new parts...
SKU: DDM016
Motone PIKE Brake and Clutch Lever Set - BREMBO ONLY VERSION
These are the PIKE Levers - fully precision machined out of billet 6061 Aluminium and Anodised BLACK
Styled to be in Keeping with your Modern Classic the PIKE levers are shorter than stock and are adjustable with 5 different reach settings so you can fully optimise for your hand
BREMBO VERSION - Only for Bikes with BREMBO Master Cylinder (with single point of adjustment) : SPEED TWIN 1200, SCRAMBLER XC, THRUXTON R/RS/FE ONLY
Compatible with the following models:
- Thruxton R/RS
- Speed Twin 1200 (Euro 5 version)
- Scrambler 1200XE
SKU: LVR002
Motone PIKE Brake and Clutch Lever Set Black
These are the PIKE Levers - fully precision machined out of billet 6061 Aluminium and Anodised BLACK. TYPE R - REGULAR FIT (FOR MOST TRIUMPH TWINS). Styled to be in Keeping with your Modern Classic the PIKE levers are shorter than stock and are adjustable with 5 different reach settings so you can fully optimise for your hand. The PIKE levers fit nearly all modern classic Triumph Twins from 2004 to the modern day
The only exception to this are the bikes with the Brembo master cylinders (TFC Bikes, Speed Twin 1200, Scrambler 1200 XC, Thruxton R/RS) - for these see Type B
Compatible with the following models:
- PIKE LEVERS TYPE R FIT ALL NEARLY ALL TRIUMPH TWINS (790cc and up)
- 2004 - NOW T100 & T120 - All Variants (Carb, EFI, Liquid cooled etc)
- 2004- NOW TRIUMPH SCRAMBLER 900 (carb, efi, STREET SCRAMBLER, SCRAMBLER 900)
- 2016 - NOW TRIUMPH BOBBER / SPEED MASTER (all variants including America, all 900-1200cc etc)
- 2016 - NOW STREET TWIN / STREET CUP / SPEED TWIN 900
- 2004 - 2015 THRUXTON (900cc variants)
SKU: LVR001
Motone T100 Bar End Mirror Adapter Kit
These BAR END Adapter Brackets are designed for your aircool (2001-2015) Triumph Bonneville T100 (or Thruxton or bike of that era with One Inch bars)
Inside the original Triumph bars is a female thread which these adapters screw right into (Screws included in the kit) meaning that you can then fit Bar End Mirrors - such as the ones we make - of course if by some temporary lapse of judgement you have some other brand bar end mirrors they will work too (although did you know ours are better)
SOLD IN PAIRS (2 pcs)
Please note that if you no longer have the original bars but have some generic hollow ones with no thread inside we also make some adapters that will fit them too which we call the Exacta Mounts which are available.
Compatible with the following models:
- T100 Aircooled (2001-2015)
SKU: MRR006
Motone TPS Carb/Throttle Body Cover - Pair - Union Jack - Black
Sold as a pair. Made using the same technology as the original equipment manufacturing process, high pressure die cast.
Compatible with the following models:
Suitable for any of the 1200 twins.
- T120
- Thruxton R
- Thruxton S
- Bobber
- Speedmaster
SKU: MMU012
Motone Triumph Bobber 47mm Smooth Fork Shrouds + Klingon Handlebar Mount Indicator Brackets
These are the SPATZ SMOOTH Fork Shrouds Bundled with Klingon HANDLEBAR MOUNT Indicator Brackets
Custom Fork Shrouds for your Triumph Bobber, designed to allow you to beef up the look of your front end
The Klingons work with M8 Thread Indicators
HIGH PRESSURE DIE CAST - Out of Solid Aluminium, Kit includes all hardware including O-Rings to keep dust dirt out and Bolts and Grub Screws to fit
Compatible with the following models:
- FITS 47mm Fork Bobber (and Bobber BLACK)
- Speedmaster from 2021 On (when the fork changed to 47mm like the Bobber)
DOESNT FIT (Single Disc) 41mm Fork Bobber, not the pre 2021 Speedmaster which had a 41mm fork
SKU: MMU616+MMU596
Motone MAYHEM SHORTYS Slash-Cut Exhaust Pipes for Bobber & Speedmaster - Brushed
Limited Edition MAYHEM SHORTIES
Formed out of Series 304 Stainless Steel with Slash-Cut Turnouts at the Rear these pipes connect directly to the original Catalytic converter or the Motone X-Pipe on your Bike
SKU: MTE179
Motone Ventura - Bobber/Speedmaster - Ribbed Side Panels - Gloss Black
Custom Ribbed side panels for Triumph Bonneville Bobber / Speedmaster 1200
High quality precision injection molded ABS.
Ribs aligned specifically with the fin angle on the stock cylinders
Aluminium mesh on panel indents
GLOSS BLACK AUTOMOTIVE PAINT FINISH
Compatible with the following models:
- Bonneville Bobber
- Speedmaster 1200
SKU: MTE163
Motone Ventura - Bobber/Speedmaster - Ribbed Side Panels - Matte Black
Custom Ribbed side panels for Triumph Bonneville Bobber / Speedmaster 1200
High quality precision injection molded ABS.
Ribs aligned specifically with the fin angle on the stock cylinders
Aluminium mesh on panel indents
MATTE BLACK AUTOMOTIVE PAINT FINISH
Compatible with the following models:
- Bonneville Bobber
- Speedmaster 1200
SKU: MTE164
Motone Ventura - Cortado Tail Tidy Kit
CORTADO NO-WELD - CUSTOM FRAME KIT - LOOP/SEAT/MUDGUARD/LIGHT
Main CORTADO Consists of these parts :
MTE210A - Seat
MTE210B - Steel Rear Loop Fixings
MTE210C - Fender - Gloss Black
MTE210D - Cutting Template
PNT - Frame Touch-Up Paint and Applicator
DDM021 - Plug and Play Rear Loom (Suitable for all tail light/3in1/Indicator Combinations)
MEL004 - ELDORAD O Gloss Tail Light Unit (Includes down facing LEDs for License plate illumination)
Beyond this Kit you will also have to decide where you want to mount your Turn Signals, there are 2 main locations.
A - Hang off the Number Plate Bracke
B - Mount on the Top Shocks
Compatible with the following models:
- Liquid Cooled T100 and T120
- Street Twin 900 / Speed Twin 900
- Street Scrambler / Scrambler 900
SKU: MTE210
Motone Raceblade Front Mudguard/Fender - Black Anodised - LC Bikes
Machine rolled out of 5052 Aluminium, Trimmed, Drilled - this front mudguard is bolt-on for your Triumph Bonneville.
Available here in a BLACK anodised finish
Compatible with the following models:
This version is designed to fit Liquid Cooled Triumph Twins 2016 and Up
- Street Twin
- T100
- T120
- Street Cup
- Street Scrambler
Will not fit Bobber and Thruxton R
Alternative version for pre 2016 twins also available with different bolt pattern.
SKU: MTE123
Motone Lamprey - Under Seat Tail Light Mounts for OE Bobber Seat
These are the LAMPREY - Precision Cast in Aluminium to match the exact contours on the underside of the stock Triumph BOBBER Seat Base - they also allow the wiring to be nicely hidden o the wires can exit towards the front of the seat
They are designed to work with our PICO or ICON Tail lights of either the 3in1 Variation (Indicator, Brake, Running Lights) or the T/S (Turn Signal aka Indicator version) though in fact you can also mount other brand Lights should you wish to - the hole is designed for a M8 Thread
Sold as a Set of 2 pieces (1 Left and 1 Right sided piece)
This version - BLACK
Compatible with the following models:
- OE Bobber Seat
SKU: MMU670
Motone Tail Tidy Kit - GORT Light Krackle Black
Tail Tidy Plate 2.0 with Storage Tray and Motone GORT Tail Light Integrated. (Gort Light also has down facing led array for license plate illumination)
Our latest iteration of the kit comes with modular removable Indicator bracket which means that for those who want to mount the signals elsewhere its even easier.
Compatible with the following models:
(Liquid Cooled Triumph Twins from 2016 and up)
- Street Twin
- Street Cup
- Street Scrambler
- T100 / T120
Plug and play wiring loom as follows: Our Adapter comes both colour and letter coded with each function banded together and labelled for easy use. It also utilises all 6 of the stock loom plugs giving you an extra live connector to run any auxiliary devices
SKU: CBS004+MEL525+DDM021
Motone SIDEKICK SLIM (Axle-Mount) Side Mount Number Plate Kit (No Tail Light Version)(US SPEC VERTICAL PLATE)
We have made several versions of this kit - this version includes a license plate light but no tail light, we also have a tail light version
Compatible with all LC Triumph Twins 2016 up
The Pillbox Light is designed to Plug and Play directly into any Motone rear wiring loom plug and play adapters
For Example this one DDM016 for the BOBBER/Speedmaster/Scramber 1200/Speed Twin 1200 Eur4
Or For Street Twin/Speed Twin 900/T100/T120 this one DDM021
Or Speed Twin 1200 This one DDM017
Kits Consists of:
Axle Plate Bracket - Forged Stainless Steel (MMU607)
SLIM USA SPEC Side Mount Plate Mount Kit - Laser Cut Aluminium - Black Powder Coat (MMU618)
The Pillbox - our E-Marked Street Legal Micro LED License Plate Light - 6061 Billet Aluminium and 120cm of wiring cable with 3.9mm bullet connector terminals
The Number plate itself mounts to Axle Plate Bracket using counter sunk screws which are provided - the plate has counter sunk holes at various levels so you can set it at a suitable height for the size of your number plate on your bike.
SKU: MMU607+MMU618+MLP001
Motone The Elevator - Adjustable Height Front Mudguard/Fender Bracket
Developed to alleviate the issue of not being able to fit the front mudguard when you fit an oversized front tyre.
Its of critical importance to your safety that you factor in tyre expansion under speed when fitting this item - modern type radial tyres will only expand a few mm - vintage style cross ply tyres can well expand over 15mm under speed and load so bare this in mind before fitting
We have designed in 4 points of height adjustable on the bracket (rather than a sliding adjustment again for safety reasons). If in doubt go higher than you think required
Made out of Steel and Painted in Black - it also includes hose clips - one of which is optional for if have a dual disc front fork like the T120
Compatible with the following models (fit 2016 and Up):
- T100 LC
- T120
- Street Twin / Speed Twin 900
- Street Scrambler / Scrambler 900
It may work on some other models which we will update here after testing
SKU: MTE211
Motone The SPATZ - 47mm Fork Shrouds Integrated Indicator Mounts
These are the SPATZ. Our new custom Fork Shrouds for your Triumph Bobber, designed to allow you to beef up the look of your front end as well as including a set of mounts for any Indicator you might want to fit (and associate blanking plugs to make them neat whichever style you fit). That means they will work with any M8 Indicator (like our PICO), or any M10 (Like our Billet), or the standard OEM Triumph (standard size or smaller ones).
HIGH PRESSURE DIE CAST - Out of Solid Aluminium, Kit includes all hardware including O-Rings to keep dust dirt out and Bolts and Grub Screws to fit
Compatible with the following models:
- FITS 47mm Fork Bobber (and Bobber BLACK)
- Speedmaster from 2021 On (when the fork changed to 47mm like the Bobber)
DOESNT FIT (Single Disc) 41mm Fork Bobber, not the pre 2021 Speedmaster which had a 41mm fork
SKU: MMU615
Motone The Claw - Rear Number Plate Hanger - Triumph LC - Horizontal Plate
This is the CLAW. Fits using the rear axle adjuster mount point - coupled with bent steel bars which have the number plate hanger aligned in the centre of rear wheel. It comes with a laser cut plate for the number plate as well as our billet e-marked (lab tested street legal) PILLBOX LED Plate illumination light. This has a 120cm of cable and terminates into Japanese spec 3.9mm Bullets.
Compatible with the following models (from 2016 to now):
we also make plug and play wiring loom adapters for all this bikes depending on which model you have:
- DDM021[Street Twin, Speed Twin 900, Street Scrambler, Scrambler 900, T100 LC, T120, Speed Twin 1200 EUR4 Only (rwu fork)]
- DDM016 [Bobber, Speedmaster, Scrambler 1200]
- DDM017 [Speed Twin 1200 - EUR5 onwards]
SKU: MCB031+MMU604+MLP001
