These are the Ajax the latest edition of our Triline Indicator Brackets specifically designed for the Triumph Bobber
Having seen various adaptations on the road utilizing some of our existing turn signal brackets plus various spacers etc we thought we would design a specific version for the Bobber especially with our up coming Icon and Pico turn signals which also come in a 3in1 form (Brake/Running/Turn Signal)
These brackets fit using the existing air box screws at the rear of the frame and provide a mounting point where you can fit any 8 or 10mm Turn signal or Indicator.
They are also spaced horizontally so that the legal (UK/EU) distance between left and right signals is maintained
We have formed these out of high pressure die cast aluminum and they come with stainless bolts and fixings
Sold as a Set of 2 pieces (1 Left and 1 Right sided piece)
SKU: MMU592
This is our new Kit for mounting the number plate onto the Side of your Bike
This specific version of the Kit is tailored to fit:
- T100
- T120
- Street Twin
- Street Cup
- Street Scrambler
It may well fit some other models (Speed Twin Eur4 /Thruxton Eur 4) but we need to do some experiments first and will update
Kit consists of the Sidewinder Lit Edition - an Eldorado Light in matching Krackle Black, and an extended Plug and Play Loom adapter
The Loom adapter is designed to work with Motone or aftermarket Indicators (ie they terminate in a 3.9mm Bullet connector)
SKU: MMU600+DDM019+MEL021
This is our High-Tail rear mudguard available here in brushed/Black Anodised finish
The high tail mudguard exits at the top of the frame of your bike - this means that it only works on the T120/T100 when with in conjunction with a custom seat (for example any of the Motone seats like the Viper or the Rattler) but not on the stock seat on the T120/T100 which has an overhang at the rear of the frame.
Street Cup/Street Twin/Street Scrambler stock seats do not have this issue.
Machine rolled out of 5052 Aluminium, Trimmed, Drilled and then Black Anodised - this rear mudguard is bolt-on for your Triumph Bonneville.
This version of the fender comes pre drilled ready to mount any of the Motone Fender Mount Light Kits (Eldorado, Bel Air, Lecter, Cuda, Big Fin etc)
It also has a hole for wiring loom (we recommend our part code DDM012) to pass through
Compatible with the following models (2016 and Up):
- Bonneville T100
- Bonneville T120
- Street Cup
- Street Twin
- Street Scrambler
Fender measures 570mm (22.5 inches) long measuring along the circumference from front to back. 180mm in width (7 inches)
Does not include the Tail light or numberplate bracket
SKU: MTE178
Suitable for Motone Bel Air, Eldorado & Big Fin custom tail lights
Includes Rubber Gasket + Stainless Mounting Bolts
Diecast Aluminium with a Black Finish
SKU: MEL012
Full SMD-LED circuit board.
Works as Running Light, Brake Light and Number plate illumination through window on underside.
Diecast Aluminium finished in BLACK
Designed to look good on all kinds of cafe racers, hot rods, bobbers etc.
Wired as follows :
- Yellow = RUNNING light
- Red = STOP light
- Black = Earth
SKU: MEL015
Stealth Triline Design
80mm Mirror Head
6061-T6 Billet Aluminium Body
BLACK ANODISED MATTE FINISH
Hard Scratch Resistant Automotive Glass
R1400 Convex Reflective Glass
Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars Type
All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass
SKU: 2XMRR003
ULTRA THIN 4mm Mirror Head
6061-T6 Billet Aluminium Body
BLACK ANODISED GLOSS FINISH
Hard Scratch Resistant Automotive Glass
Convex Reflective Glass TuV Glass
Billet Adapters for both 22mm (7/8s) and 25.4mm (Inch) Handlebars
All Motone Billet Mirrors use real automotive glass components in our mirror products due in part to the scratch resistant nature of the engineered Glass surface - polished aluminium for reflective surface cannot hold up to same level of scratch resistance - and the other key advantage of using engineered glass means we are able to achieve a R1400 lever of reflection (much wider angle than flat aluminium/non automotive glass)
SKU: 2XMRR004
Custom CNC milled from aviation grade billet 6061t aluminium.
Includes a custom turned billet nut which slides down over the thread of your turn signal stem.
The clamps are designed to be used with any Indicators which have a M8 (8mm) thread - probably the most common size, and also the size we use on both the PICO and the ICON Indicators
Available here Anodised Black PAIR
Compatible with the following models:
- FITS TRIUMPH SCRAMBLER 400 X / SPEED 400 (54mm fork)
- FITS ALL BIKES WITH 54M FORKS
ALSO INCLUDES M8 SLEEVED BOLTS
SKU: CL8-054B
Motone Billet Turn Signals
This Sale : 2xPAIRs [4 TURNSIGNALS] - BRUSHED FINISH (AMBER BULBS, BOTH AMBER AND CLEAR LENSE INCLUDED)
Each turn signal comes with both a Clear and an Amber lense included in the package so you can assemble it as to your personal preference.
Turn Signal Body and Housing turned out of billet 6061 aluminium.
Osram 12v Amber bulbs included in the package. Lenses 40mm diameter and are e-marked. Thread stem is turned out of 10mm stainless with 30mm of usable length.
SKU: 2XXNM002M
Plug and play wiring loom for all the Liquid Cooled Triumph Twins meaning all the twins 2016 and up
Euro 4 and Euro 5 : Street Twin, Street Cup, T100, T120, Thruxton R, Thruxton S, Street Scrambler,
Euro 4 Speed Twin (2019-2020)
Our Adapter comes both colour and letter coded with each function banded together and labelled for easy use.
NOTE : MOTONE LOOM INCLUDES DIODE INLINE TO PREVENT ECU WARNING LIGHT ERROR ON NON-TRIUMPH LIGHTS
It also utilises all 6 of the stock loom plugs giving you an extra live connector to run any auxiliary devices
- T : Tail light -
- RED - BRAKE Light
- YELLOW - RUNNING Light
- BLACK - Earth
- L : Left Indicator/Turn Signal
- BROWN - LHS Signal
- BLACK - Earth
- R : Right Indicator/Turn Signal
- ORANGE - RHS Signal
- BLACK - Earth
- A : Auxiliary Live
- GREEN - AUX
- BLACK - Earth
Note : 6-Way loom connector hermetically sealed to prevent water ingress
Does not fit Bobber and Speedmaster (See DDM016) and Euro 5 Speed Twin (2022 and on) - (new one for this coming soon)
SKU: DDM012
Custom CNC turned out of aviation grade billet 6061t aluminium.
This sale is for the Ribbed foot peg as pictured in Black.
The peg is designed to mate with the stock factory gear shifter pedal and comes with the appropriate stainless bolt to fit it.
We recommend to use thread locker when fitting this and many other parts to your motorcycle.
SKU: GSS004
Ribbed foot peg as pictured in BRASS
The peg is designed to mate with the stock factory gear shifter pedal and comes with the appropriate stainless bolt to fit it.
We recommend to use thread locker when fitting this and many other parts to your motorcycle.
SKU: GSS005
Full SMD-LED circuit board.
Works as Running Light, Brake Light and Number plate illumination through window on underside.
Diecast Aluminium with a Krackle Matte Powder Coat Black Finish
Designed to look good on all kinds of cafe racers, hot rods, bobbers etc.
Wired as follows :
- Yellow = RUNNING light
- Red = STOP light
- Black = Earth
MTE178 - High Tail Fender will be needed for fitment to T100/T120, Street Scrambler 900, Street Twin 900 and Speed Twin 900
SKU: MEL021+MEL022
Light Bracket for Scrambler 1200 - listed here as the Light Bracket only so you can pick and mix different options to suit
High Pressure Die Cast Aluminium - GLOSS BLACK - To be Combined with any of the following Lights:
- ELDORADO
- BEL-AIR
- LECTER
- CUDA
- BIG FIN
SKU: MEL027
Sold as a pair. Made using the same technology as the original equipment manufacturing process, high pressure die cast.
Suitable for any of the 1200 twins: Compatibe with the following models:
- T120
- Thruxton R
- Thruxton S
- Bobber
- Speedmaster
- Scrambler 1200
The covers come with 6 brass bolts similar to those found on the original monobloc Amal carbs, which were of course the inspiration for the look of the throttle body that Triumph has employed on these motors - fitment of the brass bolts is optional - you can also reuse your stock silver bolts.
SKU: MMU016
Sold as a pair. Made using the same technology as the original equipment manufacturing process, high pressure die cast.
Suitable for any of the 1200 twins Compatible with the following models:
- T120
- Thruxton R
- Thruxton S
- Bobber
- Speedmaster
- Scrambler 1200
Sold here in Raw metal finish - this finish sits well with the stock carb bodies themselves as pictured
The covers come with 6 brass bolts similar to those found on the original monobloc Amal carbs, which were of course the inspiration for the look of the throttle body that Triumph has employed on these motors - fitment of the brass bolts is optional - you can also reuse your stock silver bolts.
SKU: MMU057
Ranger Foot Pegs - Investment Cast Grade 304 Stainless finished in Black Powder
Available here as a set for the Rider (Pair Left and Right) when your bike is setup for solo riding
Compatible with the following models (2016 and Up):
- Street Twin
- Street Cup
- Street Scrambler
- T100
- T120
- Speed Twin
- Thruxton
SKU: MMU501
Investment cast out of 300 Series Stainless Steel and Powder Coated in Black - These are the Rangers - Now available for your Triumph Bobber
These will not fit the Speedmaster if you are running forward controls (if you have moved the pegs back to Bobber mid position then they will fit ok)
All good with all years Triumph Bobber
SKU: MMU502
Threaded Stainless Rod - This version in Billet 300 Series Stainless
2 Bobbins - For using a Paddock Stand at home (so you dont need to lug a centre stand around attached to your bike all the time!)
Compatible with the following models:
- Street Twin
- Street Cup
- Street Scrambler
- Speed Twin
- Thruxton R
- Thruxton RS
Also fits T100 and T120 as long as you have swapped out the original silencers for something more tasteful (surely you have a set of Motone ones?)
SKU: MMU550
If you have tried to swap your fuel cap out from the stock "monza" on your Thruxton 1200/Speed Twin/Scrambler 1200 tank you will have found that you have been left with a strange notched ridge that is welded into the top of the tank.
Up until now your only choice was either ignore it or grind it off. We have machined these snap-fit ring adapters out of billet to take care of this problem for you. This sale is for the ring adapter piece only cnc machined out of 6061-t6 aluminium. Suitable for use in combination with any Motone Monza or Billet Gas Cap
Compatible with the following models:
- Speed Twin
- Thruxton
- Scambler 1200
SKU: MMU554
Deep Drawn from type 5052 Aluminium Sheet - the Motone Defender Sump Guard is built to last. Hand Brushed and then anodised Black
DEFENDER MKI Suitable for 2016 and Up Modern Classic Triumph motorcycles
- Street Cup
- Street Twin
- Street Scrambler
- Speed Twin
- Thruxton 1200/R/RS
- T100
- T120
For the Speedmaster or Triumph Bobber please see the DEFENDER MKII
SKU: MTE139
Type: SATURN V
Material: Stainless Steel, Aluminum
Manufacturing method welding, CNC Cut-out
Quantity: 2pc. Set
Included Parts: Baffle, Gasket, Exhaust Clamp
Short Type Slip-on Silencer "SATURN V (Saturn Five)
The end cap is made of luxurious aluminum cut-out, and the body is made of corrosion-resistant 300 series stainless steel. Gasket, exhaust clamp and removable baffle are included.
Compatible with the following models:
- Street Twin
SKU: MTE156
Custom CNC milled from aviation grade billet 6061t aluminium.
Includes all stainless fixings/washers.
Available here Anodised Black (also available in silver)
Fits in front fork assembly either behind or in place of regulator below the headlight.
You do not have to relocate the regulator to fit this part - however we do make a regulator relocation bracket as well.
SUITABLE FOR USE WITH AFTERMARKET INDICATORS WITH 8-10mm THREADS
Compatible with the following models:
FITS LC (LIQUID COOLED) 2016/2017 & UP
- BONNEVILLE T100
- T120
- STREET TWIN
- STREET CUP
SKU: PTS011
Custom CNC milled from aviation grade billet 6061t aluminium.
Includes all stainless fixings/washers.
Available here Anodised Black (also available in silver)
Fits in front fork assembly either behind or in place of regulator below the headlight.
You do not have to relocate the regulator to fit this part - however we do make a regulator relocation bracket as well.
SUITABLE FOR USE WITH AFTERMARKET INDICATORS WITH 8-10mm THREADS AS WELL AS FACTORY TRIUMPH INDICATORS
Compatible with the following models (2001-2015 Present - Fits both CARB and EFI bikes):
- HINKLEY BONNEVILLE T100
- SE
- SCRAMBLER
- THRUXTON
SKU: PTS611
Custom CNC milled from aviation grade billet 6061t aluminium.
Includes a custom turned billet nut which slides down over the thread of your turn signal stem.
The clamps are designed primarily to be used with Motone indicators which run on a M10x1.50 stainless bolt
We also include some threaded nuts at M10x1.25 pitch as well so as long as your signals run on a M10 bolt and have about 30mm length of thread other brand indicators may work with them as well.
Available here Anodised Black PAIR
Compatible with the following models:
- BOBBER BLACK (47mm fork)
- FITS ALL BIKES WITH 47MM FORKS
ALSO INCLUDES M10x1.5MM AND M10x1.25MM SLEEVED BOLTS
SKU: PXN047B
