CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap. Will not fit the round-shaped reservoirs as fitted to some models with 7/8s bars.
Compatible with the following models:
- Bonneville
- Bonneville T100
- Bonneville T120
- Speedmaster
- Thruxton
SKU: SNG218
Motone Quality - High Pressure Die Cast Engine Clutch Side Engine Cover
Compatible with the following models:
- Street Twin
- Street Cup
- Speed Twin
- Street Scrambler
- Bobber
- Thruxton
- Scrambler 1200
- T100
- T120
SKU: MMU036
Motone Quality - High Pressure Die Cast Engine Clutch Side Engine Cover
Compatible with the following models (2016+)
- Street Twin
- Street Cup
- Speed Twin
- Street Scrambler
- Bobber
- Thruxton
- Scrambler 1200
- T100
- T120
SKU: MMU032
Motone Quality - High Pressure Die Cast Engine Clutch Side Engine Cover
Compatible with the following models (2016+):
- Street Twin
- Street Cup
- Speed Twin
- Street Scrambler
- Bobber
- Thruxton
- Scrambler 1200
- T100
- T120
SKU: MMU031
Custom lathed out of aviation grade 6061t Aluminum.
This sale is for the complete new cap fully assembled and ready to fit on your bike.
Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.
This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.
It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.
Compatible with the following models:
- BONNEVILLE
- THRUXTON 900 & 1200
- AMERICA
- SPEEDMASTER
- SCRAMBLER 1200
- BOBBER
- STREET TWIN/SPEED TWIN
- SPEED TWIN 1200
- STREET CUP
- STREET SCRAMBLER
- T100 & T120 : 2001-Present - Fits both CARB and EFI bikes.
Speed Twin 1200, Thruxton 1200 and Scrambler 1200 need an additional adapter ring MMU554 or MMU555
SKU: NXS006
Custom lathed out of aviation grade 6061t Aluminum.
This sale is for the complete new cap fully assembled and ready to fit on your bike.
Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.
This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.
It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.
Compatible with the following models:
- BONNEVILLE
- THRUXTON 900 & 1200
- AMERICA
- SPEEDMASTER
- SCRAMBLER 1200
- BOBBER
- STREET TWIN/SPEED TWIN
- SPEED TWIN 1200
- STREET CUP
- STREET SCRAMBLER
- T100 & T120 : 2001-Present - Fits both CARB and EFI bikes.
Speed Twin 1200, Thruxton 1200 and Scrambler 1200 need an additional adapter ring MMU554 or MMU555
SKU: NXS010
This sale is for a set of two seat custom rubber knee pads for your Triumph Twin in black
Design : Union Jack Black - Manufactured using a blended vulcanized natural rubber to produce a high quality weather resistant compound.
Adhesive : 468MP Automotive 3M - selected for its strength and resistance to all weather elements plus gasoline.
BUILT TO LAST
As well as the Triumph Twin range can also be fitted to any motorcycle tank - check out the images for a diagram with measurements.
SKU: MTE080
Tail Tidy Plate 2.0 with Storage Tray and Motone Eldorado Tail Light Integrated
Motone latest iteration of the kit comes with a modular removable Indicator bracket which means that for those who want to mount the signals elsewhere it’s even easier.
Suitable for Liquid Cooled Triumph Twins from 2016 and up.
- Street Twin
- Street Cup
- Street Scrambler
- T100
- T120
SKU: CBS004+MEL004+DDM012
Custom CNC milled from 3mm aviation grade billet 6061t aluminum. This sale is for a set of two Turn Signal / Indicator brackets here in anodised BLACK - Top shock mount: either between the shock and the outer bolt or on the inside between the shock and the frame depending on your preference. Large hole is 16mm - Suitable for use with many different bikes. Smaller hole for the signals will take a standard 10mm (or smaller) Turn Signal mounting bolt. These fit many makes of motorcycles - ideal for customs.
Compatible with the following models:
- HINKLEY BONNEVILLE T100
- SE
- SCRAMBLER
- THRUXTON
- STREET CUP
- T120: 2001-2017 Present - Fits both CARB and EFI bikes.
SKU: PTS002B
Black Anodised Finish. Drawn out of sheet 5052 Aluminium and then Anodised BLACK.
Compatible with the following models:
- T100
- T120 all years
- Thruxton 900
- Thruxton 1200
- Speed Twin 1200
SKU: MTE143
Brushed Metal Finish. Drawn out of sheet 5052 Aluminium.
Compatible with the following models:
- T100
- T120 all years
- Thruxton 900
- Thruxton 1200
- Speed Twin 1200
SKU: MTE165
Motone Quality - HIGH PRESSURE PRECISION DIE CAST
This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs) - The smaller of the two round engine covers. Clutch Side Badges/Covers are also available.
Compatible with the following models:
- Twin 900 and 1200 cc (2016 onwards)
- Street Twin
- Street Cup
- Street Scrambler
- Scrambler 1200
- Bonneville Bobber
- T100
- T120
- Thruxton
- Speedmaster
- Speed Twin
SKU: MMU026
Motone Quality - HIGH PRESSURE PRECISION DIE CAST
This cover is for the ACG (What was once known as the "Points" Cover on the Vintage Meriden Triumphs) - The smaller of the two round engine covers. Clutch Side Badges/Covers are also available.
Compatible with the following models:
- Twins 900 and 1200 cc (2016 onwards)
- Street Twin
- Street Cup
- Street Scrambler
- Scrambler 1200
- Bonneville Bobber
- T100
- T120
- Thruxton
- Speedmaster
- Speed Twin
SKU: MMU022
Custom 5-Axis CNC milled out of a single block of aviation grade billet 6061t aluminum. Includes all fixings necessary to mount to bike - Bolt on part - Easy to fit.
These will fit any bike with 41mm Dia Front Forks.
Compatible with the following models:
- Bonneville
- T100 from 2001 to now
- Street Twin
- Street Cup
- T120
- Bobber
SKU: MTE046
Bolt on Replacement for the Stock Riser Clamp assembly which works on any of the Triumph Bonneville family which have one inch bars. We originally designed the Up-And-Over Kit to give you a one inch rise and a one inch pull back over standard bar position. This is about as far as you can take the stock bars without having to install longer cables. Easy to fit at home with basic tools.
Compatible with the following models:
- T100 (all years aircooled and liquid cooled)
- T120
- Speedmaster (air and liquid cooled models)
- Bobber
- Thruxton EFI
- America
SKU: MTE087
CNC Cut from billet aviation 6061-T6 aluminum - fits all Hinckley Triumphs with this shape master cylinder cap.
Will not fit the round-shaped reservoirs as fitted to some models with 7/8s bars.
Comaptible with the following models:
- Bonneville
- T100
- America
- T120
- Speedmaster
- Thruxton
SKU: SNG215
Motone Billet Turn Signals
2 x Pairs [4 TURN SIGNALS] - ANODISED BLACK (AMBER BULBS, BOTH AMBER AND CLEAR LENSE INCLUDED)
Each turn signal comes with both a Clear and an Amber lense included in the package so you can assemble it as to your personal preference.
Turn Signal Body and Housing turned out of billet 6061 aluminium.
Osram 12v Amber bulbs included in the package. Lenses 40mm diameter and are e-marked. Thread stem is turned out of 10mm stainless with 30mm of usable length.
SKU: 2XXNM002B
Tanto - named after the traditional Japanese short sword
Built out of 304 Series Stainless Steel and supplier here in a Wrinkle Coat Black Finish
To suit your 2016 and up :
- Street Twin
- Street Scrambler
- Street Cup
- T100
- T120
SKU: CSS006
To make these adjuster blocks we decided to return to the manufacturing process of a bygone era to produce the kit.
Namely Hot Forged Brass.
To produce a truly individual product the chain adjusters are hand polished to reveal the facets of the forging process.
Thick Grade 304 Stainless Boss also included
Suitable for use on all the liquid cooled Twins including
- Street Twin
- Street Scrambler
- Street Cup
- Bobber
- T100
- T120
- Thruxton 1200/R/RS
- Scrambler 1200
- Speedmaster
- Speed Twin
SKU: MMU066
Machined out of CZ121 Brass Billet - Yoke Nut is suitable for use on all the 2016 and Up Triumph Twin Motorcycles
Also known as Triple Tree Nut / Steering Stem Nut and Top Yoke Nut
Compatible with the following models:
- Street Twin (Speed Twin 900)
- Speed Twin
- Street Scrambler (Scrambler 900)
- Street Cup
- Bobber
- Speedmaster
- Thruxton
- Scrambler 1200
- T100
- T120
Please note if you have a 2001-2015 Bonnie check out MMU069 instead
SKU: MMU068
These are the latest brackets we have made allowing you to fit indicators to the rear of your bike using the 2 bolt holes on either side at the top of your frame. These can be run in various combinations with our parts, depending on the rear mudguard of your bike and which make indicators you have and the length of threads they run
As is we have designed the holes to bolt on using any
Indicators with 8mm Threads
Indicators with 10mm Threads
OEM Triumph LED Indicators
As well as the above if you have a high and wide rear fender and want to fit with indicators that have particularly long threads, or you simply want to space your indicators our wider apart then you can fit this part in combination with our Billet Indicator Adapters ADT002 (for 8mm Indicators), or ADT003 (for 10mm Indicators)
Compatible with the following models:
- Street Twin
- Street Cup
- Street Scrambler
- T100 LC
- T120
- Thruxton 1200
- Speed Twin
Note if you have another accessory using these holes already it may still be possible to fit them both concurrently - use some washers under the seat latch to raise it up a few mm in this instance
SKU: MMU521
New Shock mount 2.0 Indicator brackets will work on many different types makes and models of bikes with capability to mount pretty much any known Aftermarket Indicator out there (8 or 10mm Thread no problem)
Triumph OEM (Factory Original) Type Indicators
Can be fit on outside or inside of Shock depending on the type of shock you have
Includes blanking plates if not using the OEM holes. Each bracket can be fit on either side of the bike. Made out of Stainless Steel and Powder Coated in Black.
Compatible with the following models:
- Bonneville all versions 2001-2016
- Thruxton 900 all versions 2004-2016
- Scrambler 900 all versions 2006-2016
- Speedmaster 900 all versions 2003-2017
- Bonneville T100 all versions 2017+
- Bonneville T120 all versions 2016+
- Street Twin 2016-2022
- Speed Twin 900 (2022+)
- Street Cup 2017-2019
- Street Scrambler 2017-2022
- Scrambler 900 (2022+)
- Speed Twin 1200 all versions 2019+
- Thruxton 1200/R (2016-2021)
- Thruxton RS (2019+)
- Rocket III all versions 2004-2017
- Not suitable for Scrambler 1200 all versions 2019+.
SKU: MMU585
New License Plate Indiactor Brackets
L shaped they clip into the slots that you would normally use to Bolt your Number Plate to the Plate Hanger/Bracket
Indicator brackets work with:
- All Aftermarket Indicator out there (8 or 10mm Thread no problem)
- Triumph OEM (Factory Original) Type Indicators
Includes blanking plates if not using the OEM holes
Made out of Stainless Steel and Powder Coated in Black
SKU: MMU586
Machine rolled out of 5052 Aluminium, Trimmed, Drilled - this front mudguard is bolt-on for your Triumph Bonneville.
Available here in a vertically brushed finished and Black Anodised.
Compatible with the following models:
- Good for Liquid Cooled Triumph Twins 2016 and Up
- Street Twin
- T100
- T120
- Street Cup
- Street Scrambler
- Will not fit on the Bobber or Thruxton R
SKU: MTE116
This x-pipe is designed to be fit in place of the stock catalytic converter at the base of your bike, unleashing the power your engine was naturally designed to produce. Suitable for both the 900 and 1200cc powerplant you can expect large gains for minimal effort
Compatible with the following models (all the Triumph Twin range 2016 and up except the Street Scrambler which of course has the high pipes):
- T100 LC
- T120
- Street Twin
- Street Cup
- Thruxton R & S
- Bobber
- Speedmaster
- Speed Twin
PLEASE NOTE - the following EURO 5 BIKES (Sold from year 2021 on) have link pipes welded to the stock cat which means to remove cat you have to replace not only the cat but the link pipes (and mufflers) as well.
2021 and UP : STREET TWIN/T100/T120/THRUXTON RS/SPEED TWIN - NEED NEW VERSION
MOTONE XPIPE DESIGN FITS ALL YEARS BOBBER AND SPEEDMASTER
SKU: MTE120
