All Accessories
Motone Billet Radiator Guard Kit - Union Jack - Black Wide (Bobber/Speedmaster)
Wider Version for Wider Rads of the Bobber and Speedmaster only
Motone Rad Guard for all Liquid Cooled Triumph Twins.
Casing precision milled out of 6061T Billet Aluminium and then anodised a matte black.
Rear grill is laser cut out of steel and finished in a black powder coat.
Full assembly comes ready to fit to your bike as a complete kit.
SKU: KNS002
Motone Billet Ring Adapter for fitting Gas Caps
If you have tried to swap your fuel cap out from the stock "monza" on your Thruxton 1200/Speed Twin/Scrambler 1200 tank you will have found that you have been left with a strange notched ridge that is welded into the top of the tank.
Up until now your only choice was either ignore it or grind it off. We have machined these snap-fit ring adapters out of billet to take care of this problem for you. This sale is for the ring adapter piece only cnc machined out of 6061-t6 aluminium. Suitable for use in combination with any Motone Monza or Billet Gas Cap
Compatible with the following models:
- Speed Twin
- Thruxton
- Scambler 1200
SKU: MMU554
Motone BLACK- Billet Ring Adapter for fitting Gas Caps to Speed Twin/Thruxton/Scrambler 1200
This is the BLACK version
If you have tried to swap your fuel cap out from the stock "monza" on your Thruxton 1200/Speed Twin/Scrambler 1200 tank you will have found that you have been left with a strange notched ridge that is welded into the top of the tank.
Up until now your only choice was either ignore it or grind it off.
We have machined these snap-fit ring adapters out of billet to take care of this problem for you.
This sale is for the ring adapter piece only cnc machined out of 6061-t6 aluminium - wrinkle Black Powder Coat
Suitable for use in combination with any Motone Monza or Billet Gas Cap
SKU: MMU555
Motone Black LC Pannier/Luggage Rail - Right Hand Side - Black
Motone Quality :
Built from 16mm Diameter Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness
Investment Cast Brackets
Smooth Welds
Black Powder Coat
High Quality Pannier Rail (Right Hand Side ONLY) with Investment Cast brackets in type 304 Stainless Steel - Black Powder Coat
Compatible with the following models:
- Triumph T100 2017 and up,
- Triumph T120 2016 and up,
- Triumph Street Twin 2016 and up,
- Triumph Street Scrambler 2017 and all further years and up(though obviously LHS only if high pipes).
- Triumph Street Cup and all further years and up.
SKU: MCB002RH
Motone Black LC Pannier/Luggage Rails - Pair - Black
Motone Quality :
Built from 16mm Diameter Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness
Investment Cast Brackets
Smooth Welds
Black Powder Coat
High Quality Pannier Rails with Investment Cast brackets in type 304 Stainless
Steel - Black Powder Coat
Compatible with the following models:
- Triumph T100 2017 and up,
- Triumph T120 2016 and up,
- Triumph Street Twin 2016 and up,
- Triumph Street Scrambler 2017 and all further years and up(though obviously LHS only if high pipes),
- Triumph Street Cup and all further years and up.
SKU: MCB002
Motone Chrome LC Pannier/Luggage Rails - Pair
Motone Quality :
Built from 16mm Diameter Grade 304 Stainless Steel Tubing with 1.25mm Wall Thickness
Investment Cast Brackets
Smooth Welds
Mirror Polished Finish
High Quality Pannier Rails with Investment Cast brackets in type 304 Stainless Steel - Mirror polished
Compatible with the following models:
- Triumph T100 2017 and up
- Triumph T120 2016 and up
- Triumph Street Twin 2016 and up
- Triumph Street Scrambler 2017 and all further years and up(though obviously LHS only if high pipes)
- Triumph Street Cup and all further years and up
SKU: MCB001
Motone Clutch (LHS)Cover/Badge - Union Jack - 2 Tone Brass & Black
SOLID BRASS ENGINE BADGE - 2Tone Brass & Black Finish : Krackle Black with Polished Brass Top Face
This cover is for the CLUTCH side (the larger round badge on the left hand side of the bike)
Suitable for all 900 and 1200 cc Triumph Twins from 2016 to Today:
- Street Twin
- Street Cup
- Street Scrambler
- Scrambler 1200
- Bonneville Bobber
- T100
- T120
- Thruxton
- Speedmaster
- Speed Twin
SKU: MMU549
Motone Clutch Badge - Ribbed - Black
Motone Quality - High Pressure Die Cast Engine Clutch Side Engine Cover
Compatible with the following models:
- Street Twin
- Street Cup
- Speed Twin
- Street Scrambler
- Bobber
- Thruxton
- Scrambler 1200
- T100
- T120
SKU: MMU036
Motone Clutch Badge - Union Jack - Black
Motone Quality - High Pressure Die Cast Engine Clutch Side Engine Cover
Compatible with the following models (2016+)
- Street Twin
- Street Cup
- Speed Twin
- Street Scrambler
- Bobber
- Thruxton
- Scrambler 1200
- T100
- T120
SKU: MMU032
Motone Clutch Badge - Union Jack - Black Polish
Motone Quality - High Pressure Die Cast Engine Clutch Side Engine Cover
Compatible with the following models (2016+):
- Street Twin
- Street Cup
- Speed Twin
- Street Scrambler
- Bobber
- Thruxton
- Scrambler 1200
- T100
- T120
SKU: MMU031
Motone Custom Billet Indicator Turn Signals - Set of 4 - Black
Motone Billet Turn Signals
2 x Pairs [4 TURN SIGNALS] - ANODISED BLACK (AMBER BULBS, BOTH AMBER AND CLEAR LENSE INCLUDED)
Each turn signal comes with both a Clear and an Amber lense included in the package so you can assemble it as to your personal preference.
Turn Signal Body and Housing turned out of billet 6061 aluminium.
Osram 12v Amber bulbs included in the package. Lenses 40mm diameter and are e-marked. Thread stem is turned out of 10mm stainless with 30mm of usable length.
SKU: 2XXNM002B
Motone Custom Billet Indicator Turn Signals - Set of 4 - Brushed
Motone Billet Turn Signals
This Sale : 2xPAIRs [4 TURNSIGNALS] - BRUSHED FINISH (AMBER BULBS, BOTH AMBER AND CLEAR LENSE INCLUDED)
Each turn signal comes with both a Clear and an Amber lense included in the package so you can assemble it as to your personal preference.
Turn Signal Body and Housing turned out of billet 6061 aluminium.
Osram 12v Amber bulbs included in the package. Lenses 40mm diameter and are e-marked. Thread stem is turned out of 10mm stainless with 30mm of usable length.
SKU: 2XXNM002M
Motone Custom Fuel Gas Cap - Black
Custom lathed out of aviation grade 6061t Aluminum.
This sale is for the complete new cap fully assembled and ready to fit on your bike.
Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.
This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.
It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.
Compatible with the following models:
- BONNEVILLE
- THRUXTON 900 & 1200
- AMERICA
- SPEEDMASTER
- SCRAMBLER 1200
- BOBBER
- STREET TWIN/SPEED TWIN
- SPEED TWIN 1200
- STREET CUP
- STREET SCRAMBLER
- T100 & T120 : 2001-Present - Fits both CARB and EFI bikes.
Speed Twin 1200, Thruxton 1200 and Scrambler 1200 need an additional adapter ring MMU554 or MMU555
SKU: NXS006
Motone Custom Fuel Gas Cap - Satin
Custom lathed out of aviation grade 6061t Aluminum.
This sale is for the complete new cap fully assembled and ready to fit on your bike.
Sides of the top cap knurled for extra grip - the lower threaded part of the cap has a spring-bound valve system centrally located in the middle of the bung.
This connects to 3 vents in the top part of the cap to allow alleviation of any pressure that may build up inside the tank.
It also comes with a petrol-resistant o-ring seal that sits on the top of the thread.
Compatible with the following models:
- BONNEVILLE
- THRUXTON 900 & 1200
- AMERICA
- SPEEDMASTER
- SCRAMBLER 1200
- BOBBER
- STREET TWIN/SPEED TWIN
- SPEED TWIN 1200
- STREET CUP
- STREET SCRAMBLER
- T100 & T120 : 2001-Present - Fits both CARB and EFI bikes.
Speed Twin 1200, Thruxton 1200 and Scrambler 1200 need an additional adapter ring MMU554 or MMU555
SKU: NXS010
Motone Custom Knee Pads - Union Jack
This sale is for a set of two seat custom rubber knee pads for your Triumph Twin in black
Design : Union Jack Black - Manufactured using a blended vulcanized natural rubber to produce a high quality weather resistant compound.
Adhesive : 468MP Automotive 3M - selected for its strength and resistance to all weather elements plus gasoline.
BUILT TO LAST
As well as the Triumph Twin range can also be fitted to any motorcycle tank - check out the images for a diagram with measurements.
SKU: MTE080
Motone Defender - Sump Guard - Black
Deep Drawn from type 5052 Aluminium Sheet - the Motone Defender Sump Guard is built to last. Hand Brushed and then anodised Black
DEFENDER MKI Suitable for 2016 and Up Modern Classic Triumph motorcycles
- Street Cup
- Street Twin
- Street Scrambler
- Speed Twin
- Thruxton 1200/R/RS
- T100
- T120
For the Speedmaster or Triumph Bobber please see the DEFENDER MKII
SKU: MTE139
Motone Eldorado Tail Light + Fender Mount Kit - Krackle Black
Full SMD-LED circuit board.
Works as Running Light, Brake Light and Number plate illumination through window on underside.
Diecast Aluminium with a Krackle Matte Powder Coat Black Finish
Designed to look good on all kinds of cafe racers, hot rods, bobbers etc.
Wired as follows :
- Yellow = RUNNING light
- Red = STOP light
- Black = Earth
MTE178 - High Tail Fender will be needed for fitment to T100/T120, Street Scrambler 900, Street Twin 900 and Speed Twin 900
SKU: MEL021+MEL022
Motone Eldorado Tail Tidy Kit - Black
Tail Tidy Plate 2.0 with Storage Tray and Motone Eldorado Tail Light Integrated
Motone latest iteration of the kit comes with a modular removable Indicator bracket which means that for those who want to mount the signals elsewhere it’s even easier.
Suitable for Liquid Cooled Triumph Twins from 2016 and up.
- Street Twin
- Street Cup
- Street Scrambler
- T100
- T120
SKU: CBS004+MEL004+DDM012
Motone Engine Temp Gauge Oil Filler Cap - °C - Celsius
Engine Oil Filler Cap with Built in Temperature Gauge Housing Machined out of Billet Aluminium Fitted with oil resistant O-Ring seal
This Version fits the following models: T100, T120, STREET TWIN, SPEED TWIN, STREET CUP, THRUXTON 1200, BOBBER, SPEEDMASTER 1200, STREET SCRAMBLER, SCRAMBLER 1200XE, FITS ALL 900/1200 Twins 2016-Today
Version for Earlier AC (Aircooled) Bikes is also available - AC-MMU621-C
SKU: AC-MMU621-C
Motone Front Indicator/Turn Signal Relocation Bracket - BLACK
Custom CNC milled from aviation grade billet 6061t aluminium.
Includes all stainless fixings/washers.
Available here Anodised Black (also available in silver)
Fits in front fork assembly either behind or in place of regulator below the headlight.
You do not have to relocate the regulator to fit this part - however we do make a regulator relocation bracket as well.
SUITABLE FOR USE WITH AFTERMARKET INDICATORS WITH 8-10mm THREADS AS WELL AS FACTORY TRIUMPH INDICATORS
Compatible with the following models (2001-2015 Present - Fits both CARB and EFI bikes):
- HINKLEY BONNEVILLE T100
- SE
- SCRAMBLER
- THRUXTON
SKU: PTS611
Motone Gear Shifter Lever End Peg - Ribbed - Black
Custom CNC turned out of aviation grade billet 6061t aluminium.
This sale is for the Ribbed foot peg as pictured in Black.
The peg is designed to mate with the stock factory gear shifter pedal and comes with the appropriate stainless bolt to fit it.
We recommend to use thread locker when fitting this and many other parts to your motorcycle.
SKU: GSS004
Motone Gear Shifter Lever End Peg - Ribbed - Brass
Ribbed foot peg as pictured in BRASS
The peg is designed to mate with the stock factory gear shifter pedal and comes with the appropriate stainless bolt to fit it.
We recommend to use thread locker when fitting this and many other parts to your motorcycle.
SKU: GSS005
Motone HIGH-TAIL Custom Mudguard Black Anodised - LC
This is our High-Tail rear mudguard available here in brushed/Black Anodised finish
The high tail mudguard exits at the top of the frame of your bike - this means that it only works on the T120/T100 when with in conjunction with a custom seat (for example any of the Motone seats like the Viper or the Rattler) but not on the stock seat on the T120/T100 which has an overhang at the rear of the frame.
Street Cup/Street Twin/Street Scrambler stock seats do not have this issue.
Machine rolled out of 5052 Aluminium, Trimmed, Drilled and then Black Anodised - this rear mudguard is bolt-on for your Triumph Bonneville.
This version of the fender comes pre drilled ready to mount any of the Motone Fender Mount Light Kits (Eldorado, Bel Air, Lecter, Cuda, Big Fin etc)
It also has a hole for wiring loom (we recommend our part code DDM012) to pass through
Compatible with the following models (2016 and Up):
- Bonneville T100
- Bonneville T120
- Street Cup
- Street Twin
- Street Scrambler
Fender measures 570mm (22.5 inches) long measuring along the circumference from front to back. 180mm in width (7 inches)
Does not include the Tail light or numberplate bracket
SKU: MTE178
Motone Indicator Bracket Top Shock Mount
Custom CNC milled from 3mm aviation grade billet 6061t aluminum. This sale is for a set of two Turn Signal / Indicator brackets here in anodised BLACK - Top shock mount: either between the shock and the outer bolt or on the inside between the shock and the frame depending on your preference. Large hole is 16mm - Suitable for use with many different bikes. Smaller hole for the signals will take a standard 10mm (or smaller) Turn Signal mounting bolt. These fit many makes of motorcycles - ideal for customs.
Compatible with the following models:
- HINKLEY BONNEVILLE T100
- SE
- SCRAMBLER
- THRUXTON
- STREET CUP
- T120: 2001-2017 Present - Fits both CARB and EFI bikes.
SKU: PTS002B
Motone Indicator/Turn Signal Brackets - for LC Triumphs - 8mm
CNC Machined out of Billet Aluminium and Anodised Black - SOLD AS A PAIR
These adapters fit directly onto the stock Indicator Mounts to allow you to fit an aftermarket Indicator with a regular 10mm Thread. The final position angle of your indicator is controlled by a stainless grub screw which locks the Indicator light in place. This version is for Indicators with 8mm Threads (Such as Rizoma / Kellermann etc) This product ADT002 - for Indicators/Turn Signals with 8mm Threads.
Compatible with the following models:
- Street Twin
- T100
- T120
- Thruxton
- Bobber
- Street Cup
- Street Scrambler
- Speed Twin
- These also work with Street Triple and Speed Triple and other modern Triumph motorcycles
SKU: ADT002
